Newcon-optik LAM 10M IR Bedienungsanleitung

Operation Manual LAM 10M IR LASER AIMING MODULE / TARGET POINTER105 Sparks Ave., Toronto, ON, M2H 2S5, Canada

7 1 — key; 2 — velcro tape; 3 — connector Fig. 2. Remote switch 123

8 3. DELIVERY SET 3.1. Standard delivery set LAM is supplied in the following assembly: Quantity, pcs LAM 10M IR 1 Remote switch 1 Velcro tape 2

9 4. Specifications Laser wavelength 830…850 nm Beam divergence 0.5 mrad Spot size at 50 meters 25 mm Windage and elevation adjustment range ±20

10 5. OPERATION INSTRUCTIONS 5.1. Installing the battery LAM is powered by a standard Lithium CR123 3V battery. To install a battery: - unscrew the

11 5.3. Connecting the remote control To connect the remote switch (Fig.2): - unscrew the cap of the remote connector (4, Fig.1) and store it in a

12 - remove protective cap (8, Fig. 1) from emitter tube output window; - activate LAM in mode C; - match the center of radiation spot with the aim

13 6. Maintenance, storage and transportation 6.1. General LAM is a sophisticated precise optical instrument equipped with electronics. Therefore, it

14 6.2. Storage To set LAM from combat position into a stowed one: - turn LAM off (operating modes switch (17, Fig.1) should be set to OFF position);

15 To apply new layer of lubricant: - Within two hours from cleaning apply an even 0.2-0.5 mm thick layer of lubricant on metal surfaces with a brus

16 - Cover aimer with protective cap. - Disconnect the remote switch from the weapon. - Dismount LAM from Picatinny rail. - Pack LAM and remote sw

17 7. TROUBLESHOOTING Spot shape or size has changed Emitter objective lens is dirty. Flush emitter lens with fresh water and wipe it with soft cloth.

18 8. WARRANTY NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consu

19 9. CUSTOMER SUPPORT Should you experience any difficulties with your NEWCON OPTIK product, consult the enclosed manual. If the problem remains unre

20 10. QUALITY CERTIFICATE LAM10M IR serial number: ________________________________________________ complies with all technical specifications and

NEWCON OPTIK ™ 2011 R1 – 2.11

IMPORTANT INFORMATION Read prior to activation You have just purchased a sophisticated electronic device. To operate it properly, please read this man

1 CONTENTS 1. Brief description ... 2 2. Device design ...

2 Carefully read all the instructions prior to use. Failure to obey the instructions will void the warranty! INVISIBLE LASER RADIATION CLASS I LASER

3 2. Device design 17 16 148 76543 2 1

4 Fig. 1. LAM 10M IR 1 – clamp 2 – bracket 3 – stopper 4 – remote connector 5 – body 6 – emitter 7 – emitter cap 8 – emitter protectiv

5 LAM consists of an emitter (6,7, Fig.1), a battery compartment (15,16, Fig.1), windage (9, Fig.1) and elevation (12, Fig.1) adjustment mechanisms,

6 LAM automatically turns off after 30 minutes of being switched in positions C and R. In order to activate LAM after it has automatically turned off,